Brandywine Imaging offers a variety of flat panel DR solutions to help meet your individual needs. Below you will find the three types of panel available for use in the marketplace. These include wireless, wired and tethered. Please review the information below and if you require further information, including pricing, please fill out contact form at the bottom of the page, thank you.
Wireless Flat Panel DR

Take diagnostic quality imaging with you anywhere you go!
ViVIX-S Portable, Wireless is a 14×17” flat panel digital radiography system for general radiographic applications using its unique image processing system and proprietary flat panel detector. The detector can fit into almost all existing Bucky trays as it is the same size as film or CR cassettes. Images can be quickly acquired and transmitted to the DICOM server through Wi-Fi in just seconds. The battery charger system can recharge up to 3 batteries at the same time and fully recharge them within two (2) hours. An additional tethered cable connection to the detector is also available to recharge the battery inside the detector without removing it from the panel.
ViVIX-S Portable, Wireless detector has a built-in wireless Access Point (AP) which enables customers to transmit X-ray examinations directly to a Wi-Fi enabled PC or laptop computer in the environment.
In the event the Wi-Fi communication is compromised between the detector and the image acquisition computer, the detector itself can save up to 100 images on its built-in memory card. After resuming communication with the detector, all saved images can be transmitted to the software. ViVIX-S Portable, Wireless can be installed in a single, dual or multiple detector-configuration depending on the required applications. For dual or multiple detector-configurations, ViVIX-S Wireless can also be installed with a combination of ViIVIX-S Wireless and/or other Vieworks flat panel detectors.
Versatile Diagnostic Capabilities
• 14”x17” wireless portable flat panel detector with radiographic imaging capability
• Unique electronics hardware with 14-bit signal digitization providing an extremely wide dynamic range
• Optimized algorithms for each different body part
• Preview images can be displayed within 2 seconds
Slim and Light-weight Design
• The same size as film and CR cassette
• Weight under 3.1kg
• Attachable tethered cable
Wireless Communication Standard
• Communication interface through WLAN (IEEE 802.11n)
• Dual bandwidth (2.4GHz and 5GHz) with two antennas
• Optional tether cable can allow an image acquisition and transmission through Gigabit Ethernet interface
• Perfect solution for retrofit from conventional film X-ray systems to digital radiography systems
Simple & Smart Featured
• Full compatibility with DICOM 3.0 standard and Windows™ based platform
• Automatic Exposure Detection (AED) trigger mode as well as the line trigger modes
• Various preset image processing modes for different studies
Superior Image Quality
• Brilliant Modulation Transfer Function (MTF)
• Superior diagnostic image quality through flat panel detector with the proven technology of VXvue image processing software
• Dramatically reduced X-ray dose for patient safety during an examination.
DOWNLOAD BROCHURE
ViVIX-S Portable, Wireless is a 14×17” flat panel digital radiography system for general radiographic applications using its unique image processing system and proprietary flat panel detector. The detector can fit into almost all existing Bucky trays as it is the same size as film or CR cassettes. Images can be quickly acquired and transmitted to the DICOM server through Wi-Fi in just seconds. The battery charger system can recharge up to 3 batteries at the same time and fully recharge them within two (2) hours. An additional tethered cable connection to the detector is also available to recharge the battery inside the detector without removing it from the panel.
ViVIX-S Portable, Wireless detector has a built-in wireless Access Point (AP) which enables customers to transmit X-ray examinations directly to a Wi-Fi enabled PC or laptop computer in the environment.
In the event the Wi-Fi communication is compromised between the detector and the image acquisition computer, the detector itself can save up to 100 images on its built-in memory card. After resuming communication with the detector, all saved images can be transmitted to the software. ViVIX-S Portable, Wireless can be installed in a single, dual or multiple detector-configuration depending on the required applications. For dual or multiple detector-configurations, ViVIX-S Wireless can also be installed with a combination of ViIVIX-S Wireless and/or other Vieworks flat panel detectors.
Versatile Diagnostic Capabilities
• 14”x17” wireless portable flat panel detector with radiographic imaging capability
• Unique electronics hardware with 14-bit signal digitization providing an extremely wide dynamic range
• Optimized algorithms for each different body part
• Preview images can be displayed within 2 seconds
Slim and Light-weight Design
• The same size as film and CR cassette
• Weight under 3.1kg
• Attachable tethered cable
Wireless Communication Standard
• Communication interface through WLAN (IEEE 802.11n)
• Dual bandwidth (2.4GHz and 5GHz) with two antennas
• Optional tether cable can allow an image acquisition and transmission through Gigabit Ethernet interface
• Perfect solution for retrofit from conventional film X-ray systems to digital radiography systems
Simple & Smart Featured
• Full compatibility with DICOM 3.0 standard and Windows™ based platform
• Automatic Exposure Detection (AED) trigger mode as well as the line trigger modes
• Various preset image processing modes for different studies
Superior Image Quality
• Brilliant Modulation Transfer Function (MTF)
• Superior diagnostic image quality through flat panel detector with the proven technology of VXvue image processing software
• Dramatically reduced X-ray dose for patient safety during an examination.
DOWNLOAD BROCHURE
Wired Flat Panel DR

Superb diagnostic imaging using digital radiographic technology
ViVIX-S is a Vieworks’s flat panel digital radiography system with a large field coverage area of 17”x17” designed for general radiographic application using its unique image processing system and proprietary flat panel detector. The active 9.4 Mega-pixels of ViVIX-S system ensure superior image quality for today’s high standards for precise diagnosis performance by the Vieworks digital radiographic flat panel detector technology.
ViVIX-S can be used without any connections to the X-ray generator with our patented AED (Automatic Exposure Detection) circuit included on all Vieworks flat panel detector series. ViVIX-S works just like CR or film as it is triggered by the radiation and not by a generator interface connection.
User friendly imaging software (Model: VXvue) with DICOM 3.0 standard provides consistent image quality at a dramatically reduced dose and faster image information with optimized algorithms for each different study. Image can be simply acquired and transmitted to the DICOM server through Gigabit Ethernet in seconds.
ViVIX-S can be installed in a single, dual or multiple detector-configurations depending on the required applications.For dual or multiple detector-configurations, ViVIX-S can also be installed with a combination of ViVIX-S and other flat panel detector models from Vieworks.
DOWNLOAD BROCHURE
ViVIX-S is a Vieworks’s flat panel digital radiography system with a large field coverage area of 17”x17” designed for general radiographic application using its unique image processing system and proprietary flat panel detector. The active 9.4 Mega-pixels of ViVIX-S system ensure superior image quality for today’s high standards for precise diagnosis performance by the Vieworks digital radiographic flat panel detector technology.
ViVIX-S can be used without any connections to the X-ray generator with our patented AED (Automatic Exposure Detection) circuit included on all Vieworks flat panel detector series. ViVIX-S works just like CR or film as it is triggered by the radiation and not by a generator interface connection.
User friendly imaging software (Model: VXvue) with DICOM 3.0 standard provides consistent image quality at a dramatically reduced dose and faster image information with optimized algorithms for each different study. Image can be simply acquired and transmitted to the DICOM server through Gigabit Ethernet in seconds.
ViVIX-S can be installed in a single, dual or multiple detector-configurations depending on the required applications.For dual or multiple detector-configurations, ViVIX-S can also be installed with a combination of ViVIX-S and other flat panel detector models from Vieworks.
DOWNLOAD BROCHURE
Tethered Flat Panel DR

ViVIX-S Wired 14×17” DR system employs its unique image processing and proprietary flat panel detector system to produce stunning images for both general radiographic medical and veterinary applications. The ViVIX-S Wired 14×17” DR detector is the same size as traditional film and CR cassettes, which makes upgrading to DR technology fast and cost-effective. Simply install the ViVIX-S Wired 14×17” detector in your existing cassette tray or Bucky and your x-ray images can now be acquired by the panel and transmitted to your DICOM server through the Gigabit Ethernet connection in just a few seconds. An ergonomic handle (included) can also be attached to the ViVIX-S panel if your application requires mobility.
ViVIX-S Wired 14×17” can be installed in a single, dual or multiple detector-configuration depending on the required applications. For dual or multiple detector-configurations, ViVIX-S Wired 14×17” can also be installed with a combination of ViIVIX-S Wired and/or other Vieworks flat panel detectors.
Slim and Light-weight Design• The same size as film and CR cassette
• Weight under 2.9kg
• Easy to carry with an attachable & removable handle
• Perfect solution for retrofit from conventional film X-ray systems to digital radiography systems
Versatile Diagnostic Capabilities• 14”x17” wired portable flat panel detector with radiographic imaging capability
• Unique electronics hardware with 14-bit signal digitization providing an extremely wide dynamic range
• Optimized algorithms for each different body part
• Fast readout time enables an image to be captured and transmitted within 4 seconds
Simple & Smart Featured• Full compatibility with DICOM 3.0 standard and Windows™ based platform
• Automatic Exposure Detection (AED) trigger mode as well as the line trigger modes
• Various preset image processing modes for different studies
• Communication interface through Gigabit Ethernet (1000 BASE-T)
Superior Image Quality• Brilliant Modulation Transfer Function (MTF)
• Superior diagnostic image quality through flat panel detector with the proven technology of VXvue image processing software
• Dramatically reduced X-ray dose for patient safety during an examination.
DOWNLOAD BROCHURE
ViVIX-S Wired 14×17” can be installed in a single, dual or multiple detector-configuration depending on the required applications. For dual or multiple detector-configurations, ViVIX-S Wired 14×17” can also be installed with a combination of ViIVIX-S Wired and/or other Vieworks flat panel detectors.
Slim and Light-weight Design• The same size as film and CR cassette
• Weight under 2.9kg
• Easy to carry with an attachable & removable handle
• Perfect solution for retrofit from conventional film X-ray systems to digital radiography systems
Versatile Diagnostic Capabilities• 14”x17” wired portable flat panel detector with radiographic imaging capability
• Unique electronics hardware with 14-bit signal digitization providing an extremely wide dynamic range
• Optimized algorithms for each different body part
• Fast readout time enables an image to be captured and transmitted within 4 seconds
Simple & Smart Featured• Full compatibility with DICOM 3.0 standard and Windows™ based platform
• Automatic Exposure Detection (AED) trigger mode as well as the line trigger modes
• Various preset image processing modes for different studies
• Communication interface through Gigabit Ethernet (1000 BASE-T)
Superior Image Quality• Brilliant Modulation Transfer Function (MTF)
• Superior diagnostic image quality through flat panel detector with the proven technology of VXvue image processing software
• Dramatically reduced X-ray dose for patient safety during an examination.
DOWNLOAD BROCHURE
ViVIX VXvue Software
Vieworks RSNA 2103