ViVIX-S Portable, Wireless is a 14×17” flat panel digital
radiography system for general radiographic applications using
its unique image processing system and proprietary flat panel detector. The
detector can fit into almost all existing Bucky trays as it is the same size as
film or CR cassettes. Images can be quickly acquired and transmitted to the
DICOM server through Wi-Fi in just seconds. The battery charger system can
recharge up to 3 batteries at the same time and fully recharge them within two
(2) hours. An optional tethered cable connection to the detector is available
to charge the panel without having to remove it from the Bucky.
ViVIX-S Portable, Wireless detector has a built-in wireless Access Point (AP) which enables customers to transmit X-ray examinations directly to a Wi-Fi enabled PC or laptop computer in the environment.
In the event the Wi-Fi communication is compromised between the detector and the image acquisition computer, the detector itself can save up to 100 images on its built-in memory card. After resuming communication with the detector, all saved images can be transmitted to the software. ViVIX-S Portable, Wireless can be installed in a single, dual or multiple detector-configurations depending on the required applications. For dual or multiple detector-configurations, ViVIX-S Wireless can also be installed with a combination of ViIVIX-S Wireless and/or other Vieworks flat panel detectors.
Versatile Diagnostic Capabilities • 14”x17” wireless portable flat panel detector with radiographic imaging capability
• Unique electronics hardware with 14-bit signal digitization providing an extremely wide dynamic range
• Optimized algorithms for each different body part
• Preview images can be displayed within 2 seconds
Slim and Light-weight Design
• The same size as film and CR cassette
• Weight under 3.1kg
• Attachable tethered cable
Wireless Communication Standard
• Communication interface through WLAN (IEEE 802.11n)
• Dual bandwidth (2.4GHz and 5GHz) with two antennas
• Optional tether cable can allow an image acquisition and transmission through Gigabit Ethernet interface
• Perfect solution for retrofit from conventional film X-ray systems to digital radiography systems
Simple & Smart Featured
• Full compatibility with DICOM 3.0 standard and Windows™ based platform
• Automatic Exposure Detection (AED) trigger mode as well as the line trigger modes
• various preset image processing modes for different studies
Superior Image Quality
• Brilliant Modulation Transfer Function (MTF)
• Superior diagnostic image quality through flat panel detector with the proven technology of VXvue image processing software
• Dramatically reduced X-ray dose for patient safety during an examination.
ViVIX-S Portable, Wireless detector has a built-in wireless Access Point (AP) which enables customers to transmit X-ray examinations directly to a Wi-Fi enabled PC or laptop computer in the environment.
In the event the Wi-Fi communication is compromised between the detector and the image acquisition computer, the detector itself can save up to 100 images on its built-in memory card. After resuming communication with the detector, all saved images can be transmitted to the software. ViVIX-S Portable, Wireless can be installed in a single, dual or multiple detector-configurations depending on the required applications. For dual or multiple detector-configurations, ViVIX-S Wireless can also be installed with a combination of ViIVIX-S Wireless and/or other Vieworks flat panel detectors.
Versatile Diagnostic Capabilities • 14”x17” wireless portable flat panel detector with radiographic imaging capability
• Unique electronics hardware with 14-bit signal digitization providing an extremely wide dynamic range
• Optimized algorithms for each different body part
• Preview images can be displayed within 2 seconds
Slim and Light-weight Design
• The same size as film and CR cassette
• Weight under 3.1kg
• Attachable tethered cable
Wireless Communication Standard
• Communication interface through WLAN (IEEE 802.11n)
• Dual bandwidth (2.4GHz and 5GHz) with two antennas
• Optional tether cable can allow an image acquisition and transmission through Gigabit Ethernet interface
• Perfect solution for retrofit from conventional film X-ray systems to digital radiography systems
Simple & Smart Featured
• Full compatibility with DICOM 3.0 standard and Windows™ based platform
• Automatic Exposure Detection (AED) trigger mode as well as the line trigger modes
• various preset image processing modes for different studies
Superior Image Quality
• Brilliant Modulation Transfer Function (MTF)
• Superior diagnostic image quality through flat panel detector with the proven technology of VXvue image processing software
• Dramatically reduced X-ray dose for patient safety during an examination.
Introduction to Vieworks